Houston Drayage Calculator: Instant Rates & Quotes (2026)

Houston Drayage Calculator: Instant Rates & Quotes (2026)

How much does drayage cost from Port Houston? Free houston drayage calculator: US customs, duties and port-to-door delivery priced in seconds, no signup, no calls.

Quick Answer: Drayage is the short truck move between a Port Houston terminal and a nearby warehouse or door. Houston rates are built from base line haul by mileage band, a fuel surcharge, chassis rental per day, and accessorials. Walio's calculator prices US customs clearance, duties and port-to-door delivery for your container in seconds.

Key takeaways4 points
  • A Houston drayage bill has four parts: base line haul by mileage band, fuel surcharge (a percentage of line haul), chassis rental per day, and accessorials like pre-pull, chassis split, driver wait and dry run.
  • Walio's US customs clearance starts at $745 for a full container (FCL), $695 for a shared container (LCL) and $610 for air, before duties and delivery — the calculator adds duties and the Houston port-to-door move.
  • A standard tandem chassis caps out at 80,000 lb gross; the Harris County Ship Channel overweight corridor allows up to 93,000 lb with a TxDMV port authority permit and a tri-axle chassis.
  • Demurrage is charged by the terminal for a container left on the dock; per diem (detention) is charged by the ocean carrier for its equipment out on the street. Two different clocks, two different bills.
Import to the USA
What will US customs and duties cost?
Producte.g. LED lamps, coffee beans Delivery ZIPe.g. 33166 Calculate duties & customs → Duties, customs and delivery in seconds

This page explains how every line on a Houston drayage invoice is built, then hands you the number. The houston drayage calculator below prices US customs clearance, duties and the port-to-door leg for your exact container.

Instant quote

See your price in seconds

Real carrier rates, no signup, no follow-up calls.

How much does drayage cost from the Port of Houston?

Quick Answer: Houston drayage is priced by distance band from the terminal, container size, gross weight and how long the chassis stays out. A 45-mile run to Katy and a 245-mile run to Dallas sit in different rate structures entirely. Enter your terminal, ZIP and container details in the calculator for your exact number.

Four drivers set the price, in this order. Mileage band from the terminal does most of the work. Container size and gross weight decide the chassis type and whether a permit is needed. Chassis days and gate-triggered accessorials finish the bill.

Runs under 50 miles are normally quoted as a flat local lane rate. Past roughly 150 miles, the move behaves like a regional truckload: a per-mile rate plus the risk of a second driver day.

Destination

One-way miles from Bayport

Rate band

Pasadena, TX

12

Local flat lane

Baytown, TX

22

Local flat lane

Houston city

25

Local flat lane

Sugar Land, TX

38

Local flat lane

Katy, TX

45

Local flat lane

Brookshire, TX

55

Extended local

Conroe, TX

65

Extended local

Austin, TX

165

Regional truckload

San Antonio, TX

200

Regional truckload

Dallas, TX

245

Regional truckload

Laredo, TX

330

Long haul / second driver day

El Paso, TX

745

Long haul / team or relay

Walio's published US customs clearance starts at $745 for FCL, $695 for LCL and $610 for air. That covers customs entry, bond, ISF/AMS filing, handling and CBP fee minimums, before duties and delivery.

Duties, MPF and HMF are published US government charges, not Walio prices. CBP sets them, and the calculator computes them from your HS code, country of origin and declared value.

Instant quote

See your price in seconds

Real carrier rates, no signup, no follow-up calls.

Houston drayage calculator: how do I calculate my rate?

Quick Answer: Four inputs produce a Houston number: terminal, destination ZIP, container size and gross weight. The calculator on this page prices US customs clearance, duties and tariffs with CBP fees, and the delivery leg from the Houston port to your door. It does not price ocean or air freight into the US.

Enter your terminal first — Barbours Cut, Bayport, Turning Basin, UP Englewood or BNSF Pearland. Then add the destination ZIP, the box size (20ft, 40ft, 40HC, 45ft), gross weight in pounds, plus the HS code, origin country and commercial invoice value.

The quote assembles the same way a carrier builds it: base line haul + fuel surcharge + chassis per day + accessorials actually incurred. The fuel surcharge is a percentage of line haul that moves with the DOE diesel index, so it changes week to week.

💡

An all-in number is easier to compare, but ask which accessorials are capped and which pass through at cost. Uncapped driver wait and chassis days are where a cheap-looking Houston quote balloons.

A specialist quotes the ocean or air freight into Houston within one business day. The houston drayage calculator covers the US side instantly. For a sense of how a lane-specific tool handles the international leg, see our Sea-Air China to Guatemala Calculator: 2026 Rates.

Instant quote

See your price in seconds

Real carrier rates, no signup, no follow-up calls.

Barbours Cut, Bayport, Turning Basin or a rail ramp?

Quick Answer: Port Houston's container terminals behave differently at the gate. Bayport and Barbours Cut run appointment systems and publish their own free time; Turning Basin handles breakbulk and some specialty loads. UP Englewood and BNSF Pearland are rail ramps with their own free-time rules and a separate per diem clock.

Facility

Cargo type

Appointments

Free time source

Cost impact

Bayport

Containers

Required

Port Houston tariff

Adds 10–15 mi to NW Houston runs

Barbours Cut

Containers

Required

Port Houston tariff

Gate queues risk driver wait charges

Turning Basin

Breakbulk, project, flat rack

Varies by berth

Port Houston tariff

Specialized trailer, higher rate

UP Englewood / Settegast

Intermodal containers

Required

UP ramp rules

Shorter free time, ramp storage billed separately

BNSF Pearland

Intermodal containers

Required

BNSF ramp rules

Shorter free time, separate per diem clock

Bayport sits closer to the Pasadena and Clear Lake industrial belt. Barbours Cut favors La Porte, Baytown and the I-10 East run toward Dallas. Your terminal of discharge, not just distance, changes the drayage number.

Missed appointments and dual-transaction rules drive dry-run charges — the most common surprise line on a Houston invoice.

Instant quote

See your price in seconds

Real carrier rates, no signup, no follow-up calls.

What do container size and weight change in Houston?

Quick Answer: Size sets the chassis; weight sets the permit. A 20ft box of dense cargo often costs more to move than a 40ft of light freight, because the payload pushes past the 80,000 lb legal gross limit and forces a tri-axle chassis plus an overweight permit for the corridor run.

Container

Chassis required

Gross limit

Permit

Price direction

20ft dry

20ft or slider tandem

80,000 lb

None if legal

Base

40ft dry

40ft tandem

80,000 lb

None if legal

Base

40ft high cube

40ft tandem

80,000 lb

Height check on low clearances

Base

45ft

45ft extendable (scarce)

80,000 lb

None if legal

Higher, lead time driven

Overweight

Tri-axle

93,000 lb on corridor

TxDMV port authority permit

Highest

Subtract tractor, chassis and container tare from 80,000 lb to find real legal payload. Tile, stone, resin, machinery and vehicles are the usual overweight triggers at Houston terminals. If your box holds a car that needs onward transport, see the Enclosed Car Shipping Calculator: Instant Rates (2026).

Do I need an overweight permit to haul a container out of the Port of Houston?

Quick Answer: Yes, if gross weight exceeds 80,000 lb. Texas allows port authority overweight permits through TxDMV for loads up to 93,000 lb, but only on designated Ship Channel corridor routes inside Harris County. Off-corridor delivery requires transloading or stripping weight before the container leaves the permitted route.

93,000lb corridor limit

Per TxDMV, the port authority overweight permit allows up to 93,000 lb gross on designated Harris County Ship Channel routes, with a tri-axle chassis.

The permit is issued as a trip or annual permit, and the motor carrier applies. Once the container leaves the corridor, standard federal and Texas weight limits apply again. Plan the destination before you book the move.

⚠️

Enforcement is active on I-10 and the Beltway

Texas DPS weigh stations and portable scales work the Ship Channel approaches. An overweight citation costs more than the permit and holds the load. If your warehouse sits off the corridor, transloading into two legal-weight truckloads at a Ship Channel facility is usually cheaper.

How many free days do I get at Port Houston before demurrage starts?

Quick Answer: Port Houston publishes free time in its tariff, counted from the day after the container is available, not from vessel arrival. After free time expires, demurrage escalates in daily tiers. Carrier per diem on the chassis and container runs on a separate clock once the box leaves the gate.

Charge

Billed by

Clock starts

Clock stops

Demurrage

Terminal (Port Houston tariff)

Day after last free day

When the box exits the gate

Per diem

Ocean carrier / NVOCC

Day the container exits the gate

When the empty is returned

Detention

Trucker

After free wait hours at your dock

When the driver is released

Ramp storage

UP or BNSF

Shorter ramp free time

When the box is pulled

You need paperwork in hand before anyone can pull the box:

  • Bill of Lading or Sea Waybill surrendered, plus the carrier or NVOCC delivery order

  • CBP customs release and carrier freight release

  • TWIC-carded driver, SCAC code and certificate of insurance

Always confirm the tariff rate in force on your dates. Port Houston and carriers such as Maersk, MSC, CMA CGM and Hapag-Lloyd revise schedules each year.

What does a real Houston drayage invoice look like?

Quick Answer: A Houston invoice has one base line and a stack of conditional lines. Bayport to Katy (45 miles) reads base line haul, fuel surcharge percentage, chassis days and any wait time. Barbours Cut to Dallas (245 miles) adds a layover or second driver day and a higher chassis-day count.

Lines arrive in this order: base line haul, fuel surcharge as a percentage of line haul, chassis rental × days, pre-pull, chassis split, driver wait after free hours, dry run, yard storage, overweight permit and tri-axle, then hazmat or reefer genset. A pre-pull means pulling the box early to beat demurrage and parking it. A chassis split is a separate trip to collect a chassis from another pool location.

Live unload

The driver waits while you strip the container. Cheapest on chassis days, but every hour past the free wait window becomes a detention line. Use it when your dock turns a 40ft box in under two hours.

Drop-and-hook or pre-pull

Drop-and-hook leaves the box at your yard and burns chassis days plus carrier per diem. A pre-pull trades a fixed fee for demurrage protection when your appointment sits past the last free day. Use it when the terminal clock is tighter than your dock schedule.

Four ways to cut a Houston bill: book early gate appointments, track both free-time clocks, use street turns to return empties into an outbound load, and transload dense cargo to escape the permit. Re-exporting after a Houston transload? Compare the onward leg with our Sea-Air Vietnam to Panama Calculator: 2026 Rates, or the Sea-Air China to Peru Calculator: 2026 Rates for Pacific routings.

Instant quote

See your price in seconds

Real carrier rates, no signup, no follow-up calls.

How much does drayage cost from the Port of Houston?+

The cost depends on the mileage band from your terminal, the container size, the gross weight and how many days you hold the chassis. A 45-mile run to Katy is priced as a local flat lane, while a 245-mile run to Dallas is priced closer to a regional truckload. Enter your terminal, destination ZIP and container details in the calculator on this page to see your number in seconds.

What does it cost to move a 40-foot container from Bayport to Katy?+

Bayport to Katy is about 45 miles one way, which puts it in Houston's local drayage band. The final figure depends on chassis days, the current fuel surcharge percentage and whether the delivery is a live unload or a drop-and-hook. The calculator prices that exact lane along with US customs clearance and duties.

How many free days do I get at Port Houston before demurrage starts?+

Free time is set by the published Port Houston tariff and counts from the day after the container becomes available, not from vessel arrival. Demurrage then escalates in daily tiers until the box leaves the terminal. Carrier per diem is a separate charge that starts the moment the container exits the gate and runs until the empty is returned.

Do I need an overweight permit to haul a container out of the Port of Houston?+

Yes, any move over 80,000 lb gross requires a TxDMV port authority overweight permit. The permit allows up to 93,000 lb, but only on the designated Ship Channel corridor routes inside Harris County. If your warehouse sits off the corridor, you will need a tri-axle move to a nearby facility and a transload into legal-weight loads.

What is included in a drayage quote?+

A drayage quote covers the base line haul between the terminal and your door, the fuel surcharge, and chassis rental for the days the equipment is out. Accessorials such as pre-pull, chassis split, driver wait, dry run and yard storage are billed only when they occur. Always ask which of those are capped and which pass through at cost.

For duty classification or tax questions, work with a licensed customs broker. For everything else, the houston drayage calculator above handles it: enter your terminal, ZIP, container size and weight, and see your US customs clearance, duties and port-to-door price in seconds — no signup, no follow-up calls.

E

Edan Jude

With thousands of shipments processed across 50+ countries, our team provides expert guidance on international freight forwarding. Learn more about us →

Instant quote

Ready to ship?

Enter where it starts and where it goes. Real carrier rates in seconds, no signup, no calls.

Get my priceReal rates · no signup · no calls
Get instant quote ↓